I. Product Introduction

Lydorflam5013ZM flame retardant is a flame retardant masterbatch with phosphorus, nitrogen, and bromine as flame retardant elements, mainly used in polypropylene. It acts as a flame retardant through gas phase and condensed phase mechanisms, with an addition of 4% to 8% to meet UL-94 V2 combustion requirements and successfully pass the needle flame test. Compared to traditional brominated flame retardants, it has a lower addition amount, does not require the addition of antimony trioxide, and possesses characteristics such as no precipitation, water resistance, and non-toxicity. The product is mainly used in the processing of plastic products such as extrusion and injection molding.

II. Product Specifications

Appearance: white granules Moisture: ≤0.5%

P content: ≥4% Br content: ≤5%

III. Processing Precautions

1. Due to the small addition ratio, it must be evenly dispersed to meet flame retardant requirements;

2. The equipment must ensure accurate temperature control to avoid local overheating due to inaccurate temperature control, which can lead to the decomposition of the flame retardant.Solution. It is recommended to set the processing temperature range at: 170 to 190 ℃.

IV. Packaging and Storage

25Kg/bag, transported as general chemicals, stored in a dry and cool place, avoiding direct sunlight.

3. No precipitation, water boil resistant, can meet 85℃, 168H water boil test

4. Can be compounded with minerals such as talc, barium sulfate, glass fiber, etc.

5. Not affected by color powders, especially not affected by carbon black

V. Packaging and Storage

25Kg/bag, transported as general chemicals, stored in a dry and cool place, avoiding direct sunlight.

One, Product introduction

Lydorflam 5001HM It is a new type of phosphorus and nitrogen halogen-free flame retardant masterbatch suitable for polyolefins, integrating acid source, carbon source, and gas source, without APP, achieving flame retardant effect through expansion, carbonization, and thermal insulation mechanisms. Based on Lydorflam 5001HM The flame-retardant polyolefin does not contain halogen elements and heavy metal elements, and the flame-retardant product has characteristics such as low density and low smoke emission.

Two, Product specifications

Appearance: white granules                     N content: ≥13%

Moisture: ≤0.5%                       P content: ≥12%

Three, Recommended dosage:

Four, Product characteristics

1. Has excellent heat resistance, not easy to produce black spots;

2. Can provide a wide processing temperature range, and a screen can be added during extrusion and granulation;

3. No precipitation, water boiling resistant, can meet the 85℃, 168H boiling water test;

4. Can be compounded with minerals such as wollastonite, barium sulfate, and glass fiber;

5. Not affected by color powders, especially not affected by carbon black.

Five, Packaging and storage

25Kg/bag, transported as general chemicals, stored in a dry and cool place, avoiding direct sunlight.